Diesel Particle Filter

Diesel Particle Filter

Your exhaust gas, which comes out after the operation of your diesel engine, passes through a final filter before being discharged from the muffler. In new generation diesel vehicles, this filter is called “diesel particulate filter”. Briefly; The Particle Filter is not a part that has an exact role in the operation of the engine. The only task of the particle filter is to ensure that the exhaust gases are brought into conformity with Europea Union norms. Diesel particle filter ((Dpf Cleaning Machines) early filling has been observed due to the quality (poor quality) of diesel in our country. It is possible to cancel the Filter for these and other reasons.

What is a particle cleaning machine and why is it needed?

The diesel particulate filter (DPF) is designed to reduce exhaust emissions, particulates such as hydrocarbons (Hc), carbon monoxide (Co) and meet emission regulation (Euro 5 – Euro 6).

It consists of a pre-catalytic converter (Precat) and a catalytic converter (main diesel oxidation catalyst + coated diesel particulate filter)


Diesel Particle Filter

The DPF collects particles from engine exhaust gases to minimize soot being thrown into the air. Soot particles build up inside the coated diesel particulate filter and burn at regular intervals to prevent the filter from clogging.

The inability of the DPF to clean itself as a result of using a short distance vehicle renders the regeneration process useless due to the full filling of the DPF due to excessive amounts of oil, particles, poor quality fuel.

(Regeneration: It is the process of regularly burning the soot in the diesel particle filter.)

It is possible to get everything you need from Çınar Makina

It will be more effective if you are in contact with an Expert Company in this regard, and get your opinions and suggestions.


* Particle and catalyst binding feature up to 150 cm
* Connecting apparatus up to 40..80 mm diameter
* Feature of adjusting water flow rate with automatic electric valve
* Water flow power max. 0-12 bar feature
* Tank and water level control system with sensor
* Resistance protection sensor
* 220 volt AC operation (Optional 220V)
* Working with a compressor between 5-10 bar
* Ability to throw out the pollution that has softened during cleaning with air support


* Complete Corrosion Internal Fasteners
* Stainless 14 Lt. Water reservoir
* 4800 Watt Redundant Heat Resistance
* Easy to Use Pneumatic Particle Filter Turner
* Moving Right, Left and Up, Down
* Conditioning Footable Air Inlet
* Pnamatik Mechanical Protection Cage

You can contact the Dpf mac sycamore machine for the machines that you can find more than one type of.